Promast PU Nail is a permanent bonding adhesive were porous and nonporous building materials needed to adhere to each other.
310 ml
12months
Specifications
High-resistant to moist and water.
Water-resistant - D4 class according to DIN EN 204.
High-resistance to chemicals.
Indoor and outdoor usage.
Fills the gaps on surfaces while bonding.
It can be sandpapered and painted over.
It has high heat endurance compared to alternative mounting adhesives.
It can be easily applied on vertical surfaces.
Adheres to concrete, wood, ceramic tiles, polystyrene panels very strong.
Application areas
Bonding wood window panes and door frames.
Steel door installations.
Staircase installations.
Furniture making and repairing.
Marine industry.
Bonding material on wet and humid areas.
Decoration materials fixing.
Technical info
Density: 1,26 g/ml
Water and Humidity Resistance: D4
Open Time: 20 minutes
Clamping Time: 60-90 minutes
Shelf Life: 12 months
Volume: 310 ml
Application methods
The application area should be void from losing particles, clean and dry.
Humidity resistant nonporous or dry surfaces should be slightly wetted before the application.
The adhesive should be applied to one surface only as a thin film.
depending on the humidity content, adhered pieces should be pressed for about 60-90 minutes.
Safety info
It contains isocyanate. If inhaled for long periods, it may cause sensitivity to respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives do not carry risks to human health or to the environment.
Warnings!!
It should be stored in its own package, away from direct sunlight, at a cool place.
After application, the adhesive may be wiped off with an appropriate solvent. Dried adhesive can only be taken off mechanically and very difficultly.
Should not be used in adhering mirrors.
On temperatures below +10C, the viscosity of the adhesive on the cartridge will lessen, thus the drying period speed will slow.
It may take 2 to 3 days for the adhesive to reach its maximum strength.
High-resistant to moist and water.
Water-resistant - D4 class according to DIN EN 204.
High-resistance to chemicals.
Indoor and outdoor usage.
Fills the gaps on surfaces while bonding.
It can be sandpapered and painted over.
It has high heat endurance compared to alternative mounting adhesives.
It can be easily applied on vertical surfaces.
Adheres to concrete, wood, ceramic tiles, polystyrene panels very strong.
Bonding wood window panes and door frames.
Steel door installations.
Staircase installations.
Furniture making and repairing.
Marine industry.
Bonding material on wet and humid areas.
Decoration materials fixing.
Density: 1,26 g/ml
Water and Humidity Resistance: D4
Open Time: 20 minutes
Clamping Time: 60-90 minutes
Shelf Life: 12 months
Volume: 310 ml
The application area should be void from losing particles, clean and dry.
Humidity resistant nonporous or dry surfaces should be slightly wetted before the application.
The adhesive should be applied to one surface only as a thin film.
depending on the humidity content, adhered pieces should be pressed for about 60-90 minutes.
It contains isocyanate. If inhaled for long periods, it may cause sensitivity to respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives do not carry risks to human health or to the environment.
It should be stored in its own package, away from direct sunlight, at a cool place.
After application, the adhesive may be wiped off with an appropriate solvent. Dried adhesive can only be taken off mechanically and very difficultly.
Should not be used in adhering mirrors.
On temperatures below +10C, the viscosity of the adhesive on the cartridge will lessen, thus the drying period speed will slow.
It may take 2 to 3 days for the adhesive to reach its maximum strength.
