Suitable both for indoor and outdoor use.
Water and air proof.
Resistant to UV lights.
Antibacterial.
Strong adhesion on non-porous substrates as glass, tile, and ceramic.

General sealing and glazing application.
Sealing around windows and doors for insulation and gap filling.
Areas with high humidity.

Curing Rate: 3 mm/day

Density: 0,96 g/lt

Tack-Free Time: 15 minutes

Operating Temperature: -40°C and +120°C

Application Surface Temperature: Between +5°C and +40°C

Shelf Life: 15 months

Volume:  280 ml

Application surfaces should be dry and clean; they should be free from rust, dirt, or grease.
It is recommended to clean and dry nonporous surfaces like tiles and glasses with a thinner-like solvent.
It is recommended to apply a primer on hard-to-stick surfaces.
For a cleaner and more eye-pleasing application masking tape can be used on either side of the joint or grout.

It contains minor amounts of volatile chemicals. Releases annoying smell and acetic acid during curing. Therefore it must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.

As the sealant will release acid, it must not be used in mirror bonding, on sensitive metal and concrete substrates.
Must be protected from water in the first 24 hours after the application.