Highly flexible firestop silicone sealant for construction joints and pipe penetrations.
280 ml
12months
Specifications
Fire-resistant up to 6 hours.
Strong unprimed adhesion to most porous and non-porous construction materials.
Suitable for use in concrete, stone, and sensitive metals.
High movement capability up to %25.
Low-odour, non-corrosive.
Outstanding resistance to UV lights, weather conditions, and temperature extremes.
Application areas
Expansion or stretched-connection joints in fire compartment walls and floors.
Pipe, cable or duct penetrations through fire compartment walls and floors.
All applications where fire protection is needed.
Technical info
Curing rate: 3 mm/day
Density: 1,36 g/lt
Tack-free time: 15 minutes
Fire Class: (DIN 4102): B1
Application Surface Temperature: Between +5°C and +40°C
Shelf life: 12 months
Volume: 280 ml
Application methods
Joints must be cleaned from, old silicones (if any), dirt, dust, loose particles, and similar contaminants.
Before the application, width joints should be filled with PE backing material.
Application width should not be between 6-30mm
For applications, more than 10-12 mm, the depth of the sealant should be approximately half of its width.
Safety info
It contains minor amounts of volatile chemicals. It must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.
Warnings!!
Not over-paintable.
Not suitable for PP, PP, PTFE, neoprene, and bituminous surfaces.
Must not be used on substrates which may bleed oil, plasticizers, and solvents.
May cause bleeding on natural stone substrates.
Fire-resistant up to 6 hours.
Strong unprimed adhesion to most porous and non-porous construction materials.
Suitable for use in concrete, stone, and sensitive metals.
High movement capability up to %25.
Low-odour, non-corrosive.
Outstanding resistance to UV lights, weather conditions, and temperature extremes.
Expansion or stretched-connection joints in fire compartment walls and floors.
Pipe, cable or duct penetrations through fire compartment walls and floors.
All applications where fire protection is needed.
Curing rate: 3 mm/day
Density: 1,36 g/lt
Tack-free time: 15 minutes
Fire Class: (DIN 4102): B1
Application Surface Temperature: Between +5°C and +40°C
Shelf life: 12 months
Volume: 280 ml
Joints must be cleaned from, old silicones (if any), dirt, dust, loose particles, and similar contaminants.
Before the application, width joints should be filled with PE backing material.
Application width should not be between 6-30mm
For applications, more than 10-12 mm, the depth of the sealant should be approximately half of its width.
It contains minor amounts of volatile chemicals. It must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.
Not over-paintable.
Not suitable for PP, PP, PTFE, neoprene, and bituminous surfaces.
Must not be used on substrates which may bleed oil, plasticizers, and solvents.
May cause bleeding on natural stone substrates.