Adhesive Sealant

Seal & Bond 25

PMP-725
Seal & Bond 25

Adhesive Sealant

Seal & Bond 25

PMP-725

Promast Seal&Bond is a single-component, multi-purpose, elastic adhesive and sealant. Following to application, it reacts with ambient humidity to form a durable and tough rubber seal.

view more

Volume

310 ml

Shelf Life

12 months

Colors
#45464c Anthracite

Promast Seal&Bond is a single-component, multi-purpose, elastic adhesive and sealant. Following to application, it reacts with ambient humidity to form a durable and tough rubber seal.

daha fazla görüntüle

Volume

310 ml

Shelf Life

12months

Colors
#45464c Anthracite

Specifications

Permanently elastic 25 % movement capability.
No shrinkage.
Cures bubble-free.
No sagging – Thixotropic.
Over paintable.
Suitable both for indoor and outdoor applications.
Suitable for light and medium traffic.
Strong adhesion on metal, glass, wood, concrete, brick, tile.

Application areas

Sealing and bonding applications in vehicles.
In production and installment of vehicle bodies.
Elastic adhesion of wood, plasterboard, metal, brick, etc materials.
Sealing applications in static joints.
In roofing applications.
Joints between prefabricated construction materials.
Sealing and bonding of ventilation ducts, gutters, and spouts, etc.
Pre-cast concrete panels expansion joints.
Body construction of cars, containers, caravans, etc.
For vibration reduction in all types of sheet metal assembly works.

Technical info

Shore A Hardness: 25-30

Density: 1,3-1,4 g/ml 

Tack-Free Time: 60 minutes 

Curing (24 hours): 2-2.5 mm

Elongation at Break: >500 

Elastic Recovery: 0,90-1.20 MPa 

Shelf Life: 12 months 

Volume: 310 ml

Application methods

Application surfaces must be clean and dry. Remove all dirt, oil grease, detergents, and loose material. Mask smooth surface to simplify clean up. Common construction materials do not need a primer application.
Cut the tip off the cartridge. Cut nozzle to the desired size at a 45°C angle. Insert the cartridge into the caulking gun. Push sealant ahead for the uniform bead. The joint width must be between 6-25mm. Tool within 15 minutes with a joint nail or putty knife. Clean off excess sealant with EMK or toluene before it gets dried.

Safety info

It contains isocyanates and minor amounts of volatile organic chemicals. Since it may cause irritation to avoid prolonged contact of wet sealant to the skin and preferably use gloves.

Warnings!!

Below +5°C, the extrusion and curing rates of PU sealant will decrease significantly.
Tends to become yellowish if constantly exposed to UV.

Documents

TDS TDS
MSDS MSDS

Permanently elastic 25 % movement capability.
No shrinkage.
Cures bubble-free.
No sagging – Thixotropic.
Over paintable.
Suitable both for indoor and outdoor applications.
Suitable for light and medium traffic.
Strong adhesion on metal, glass, wood, concrete, brick, tile.

Sealing and bonding applications in vehicles.
In production and installment of vehicle bodies.
Elastic adhesion of wood, plasterboard, metal, brick, etc materials.
Sealing applications in static joints.
In roofing applications.
Joints between prefabricated construction materials.
Sealing and bonding of ventilation ducts, gutters, and spouts, etc.
Pre-cast concrete panels expansion joints.
Body construction of cars, containers, caravans, etc.
For vibration reduction in all types of sheet metal assembly works.

Shore A Hardness: 25-30

Density: 1,3-1,4 g/ml 

Tack-Free Time: 60 minutes 

Curing (24 hours): 2-2.5 mm

Elongation at Break: >500 

Elastic Recovery: 0,90-1.20 MPa 

Shelf Life: 12 months 

Volume: 310 ml

Application surfaces must be clean and dry. Remove all dirt, oil grease, detergents, and loose material. Mask smooth surface to simplify clean up. Common construction materials do not need a primer application.
Cut the tip off the cartridge. Cut nozzle to the desired size at a 45°C angle. Insert the cartridge into the caulking gun. Push sealant ahead for the uniform bead. The joint width must be between 6-25mm. Tool within 15 minutes with a joint nail or putty knife. Clean off excess sealant with EMK or toluene before it gets dried.

It contains isocyanates and minor amounts of volatile organic chemicals. Since it may cause irritation to avoid prolonged contact of wet sealant to the skin and preferably use gloves.

Below +5°C, the extrusion and curing rates of PU sealant will decrease significantly.
Tends to become yellowish if constantly exposed to UV.

Documents

TDS TDS
MSDS MSDS