Excellent and instant adhesion to various materials;plastics, metals, tails.

Not affected by surface moisture during curing; does not bubble.
It does not contain any toxic materials, odorless.
Excellent color stability, non-yellowing.

It can be applied even underwater.

Permanent elasticity.
Primerless adhesion.
Over-paintable.

Waterproof.
Non-shrinking.
UV resistant.
Water and sea salt resistant.

Transportation and automotive assembly: It can be used for bonding and sealing metal, glass, and plastic components in automobiles, trucks, and other vehicles.
Construction and building components: This adhesive is suitable for sealing joints and gaps in construction materials such as metal, concrete, brick, and wood.

HVAC and ventilation systems: It can be used for bonding and sealing HVAC components such as ducts, pipes, and fittings.
Electrical and electronic equipment: The adhesive's electrical insulation properties make it suitable for bonding and sealing electronic equipment, such as control panels and circuit boards.

Marine and offshore applications: It is resistant to water, salt, and other marine environments, making it ideal for bonding and sealing components in boats, ships, and offshore structures.
Bonding of polyester pars on metal frames

• Surfaces that come into contact with adhesive must be clean and dry and not contain any oil, dust, or rust.
• Non-porous surfaces must be cleaned in advance with a suitable solvent.
• The applied solvent must be wept well from the surface without allowing it to evaporate.
• Primer is not needed before the application.

• Promast MS IND70 can be applied to a wide variety of substrates. However, since specific substrates such as plastics, like polycarbonate, etc., may differ from manufacturer to manufacturer, we recommend a preliminary compatibility test.

• While producing plastics, very often, releasing agents, processing aids, and other protective agents (like protection foil) are used. These should be removed before bonding. For good adhesion, you should use a Surface Activator.

• Promast MS IND70 can not be used as a glazing sealant.
• Not suitable for bonding aquariums.
• Promast MS IND70 can be used for bonding natural stone but not as a joint sealant on this type of surface. Promast MS IND70 can only be used on the bottom of natural stone tiles.
• When you apply, please ensure the materials' surface is not smudged with sealant.
• The sanitary formula should not replace regular cleaning of the joint. Excessive contamination, deposits, or soap remains will stimulate the development of fungi.
• When using different reactive joint sealants, the first joint sealant must be hardened entirely before the next one is applied.
• Promast MS IND70 has good UV resistance but can discolor under extreme conditions or after very long UV exposure.
• Discoloration due to chemicals, high temperatures, and UV radiation may occur. However, a change in color does not affect the technical properties of the product.
• Contact with bitumen, tar, or other plasticizer-releasing materials, such as EPDM, neoprene, butyl, etc., is to be avoided since it can give rise to discolorations and loss of adhesion.
• Please do not use it in applications where continuous water immersion is possible.