D4 according to DIN EN 204.
Water and moisture-resistant.
Fast curing.
Easy to apply.
It can be sandpapered or trimmed after 2 hours.
Limited expansion.
Strong adherence to surfaces.

Wood-to-wood applications.
Wood to metal, some plastics, stone, bricks, and concrete applications.
Furniture mounting or repairing.
Yacht or boat constructions.

Density: 1,10 g/ml 

Viscosity (20°C): 6.000-8.000 cps 

Open Time (20°C): 40 minutes

Clamping Time: 4 hours

Shelf Life: 12 months 

Operating Temperature: -15°C to +100°C 

Application Surface Temperature: +10°C to +30°C 

Gross Weight: 500 g

Applications performed below 5°C will not yield high enough performance in adhering.
Adhered surfaces should be clean and free from grease and dust.
Especially when adhering surfaces that do not contain or do not emit humidity, the surfaces are recommended to be dampened approximately 5% water compared to the amount of adhesive used.
The adhesive should be applied as a thin layer only to one of the surfaces which will be adhered to.
Surfaces should be put together and pressed before the open time of the product expires.

It contains diphenylmethane -4, 4 diisocyanates. If inhaled for long periods, it may cause sensitivity to respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives do not carry risks to human health or to the environment.

Cleaning the application surfaces from dirt, dust, and oil will improve the adhesion performance
Bonding materials must be pressed for a minimum of two hours.
Curing time will be retarded in temperatures below +5°C
Full cure can take up to 1 day, during this period bonding parts must be handled by care.
It does not bond plastics as PE, PP, nylon, or Teflon.