In the case of intermittent use, the valve is not blocked and can be used repeatedly at different times.
Due to its special formulation, it provides up to 30% higher performance than general-purpose foams.
Cures very quickly; it dries easily even at low temperatures and in low-humidity conditions.
It provides higher adhesion to common construction materials.
It provides effective sound and heat insulation.
Provides controlled expansion after application.

For fixing the pipes of gas, water, electricity, etc.
Installations and filling the penetration gaps.
For filling holes, cracks, and gaps in buildings for isolation purposes.
Assembling and fixing of many materials required in the structure.

Density: 23-26 kg/m³

Tack-Free Time: 8-10 minutes

Cutting Time: 30-40 minutes

Shelf Life: 15 months

Volume: 750 ml

Shrinkage: 3% max

Take out the protective cap and screw the straw on the valve
Shake the can vigorously.
While the can is upside down, press the trigger for the foam to come out.
Since the foam would expand, partially fill the gaps where you would apply.
From time to time, shake the can again during the application.

It contains diphenylmethane -4, 4 diisocyanates. If inhaled for long periods, it may cause sensitivity on respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. The aerosol can is filled with combustible propellant gasses under high pressure. For that reason they should not be punctures, should be kept away from heat sources or flames.

Do not fill the voids more than %50 of their volumes.