Neutral Sanitary Silicone

Sanitan NT

PMS-560
Sanitan NT

Neutral Sanitary Silicone

Sanitan NT

PMS-560

Promast Sanitan NT is a neutral curing 100% pure kitchen-bathroom silicone sealant that can be also used on sensitive surfaces. It is a very high-performance sealant with antibacterial protection which prevents mold and fungal growth in wet environments.

view more

Volume

280 ml

Shelf Life

15 months

Colors
#RRGGBBAA Transparent
#FFFAFA White

Promast Sanitan NT is a neutral curing 100% pure kitchen-bathroom silicone sealant that can be also used on sensitive surfaces. It is a very high-performance sealant with antibacterial protection which prevents mold and fungal growth in wet environments.

daha fazla görüntüle

Volume

280 ml

Shelf Life

15months

Colors
#RRGGBBAA Transparent
#FFFAFA White

Specifications

100% pure silicone sealant, organic oil-free.
It does not shrink with time.
It contains long-lasting fungicides to prevent mildew and fungus from being formed.
Long-term resistance to humidity and moisture.
Resistant to cleaning supplies and chemicals.
Low-odour cure, non-corrosive.
Strong adhesion to acrylic and polyester bathtubs, PVC shower cabins, and shower trays.
Suitable on glass, tile, ceramic, metal, concrete, and wood substrates.

Application areas

High humidity and wet environments include saunas, pools, kitchens, bathrooms, etc.
Suitable with polyester, PVC and acrylic bathtubs, shower trays, and sinks.
Connection joints of tiles touching the water.
Sealing around shower cabins, bathtubs, sinks, sanitarywares, etc.
Especially on sensitive surfaces.

Technical info

Curing Rate: 3 mm/day

Density: 1,03 g/lt

Tack-Free Time: 15 minutes

Operating Temperature: -40°C and +180°C

Application Surface Temperature: Between +5°C and +40°C

Shelf Life: 15 months

Volume:  280 ml

Application methods

Make sure application surfaces are clean and dry and free of grease and dust.
If there is previously applied silicone on the surface, it should be cleaned mechanically and after that, it should be cleaned with a solvent like thinner.
Sides of joints and grouts should be covered with masking tape.
The application width should not be longer than 20 mm.
For applications, more than 10-12 mm, the depth of the sealant should be approximately half of its width.
Applied silicone may be corrected within 5-10 minutes.
If using masking tape, it should be removed right after the correction.
Silicone smeared around can be cleaned with thinner.

Safety info

It contains minor amounts of volatile chemicals. It must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.

Warnings!!

Not suitable for PE, PP, PFTE, neoprene, and bituminous surfaces.
It cannot be painted over.

Documents

TDS TDS
MSDS MSDS

100% pure silicone sealant, organic oil-free.
It does not shrink with time.
It contains long-lasting fungicides to prevent mildew and fungus from being formed.
Long-term resistance to humidity and moisture.
Resistant to cleaning supplies and chemicals.
Low-odour cure, non-corrosive.
Strong adhesion to acrylic and polyester bathtubs, PVC shower cabins, and shower trays.
Suitable on glass, tile, ceramic, metal, concrete, and wood substrates.

High humidity and wet environments include saunas, pools, kitchens, bathrooms, etc.
Suitable with polyester, PVC and acrylic bathtubs, shower trays, and sinks.
Connection joints of tiles touching the water.
Sealing around shower cabins, bathtubs, sinks, sanitarywares, etc.
Especially on sensitive surfaces.

Curing Rate: 3 mm/day

Density: 1,03 g/lt

Tack-Free Time: 15 minutes

Operating Temperature: -40°C and +180°C

Application Surface Temperature: Between +5°C and +40°C

Shelf Life: 15 months

Volume:  280 ml

Make sure application surfaces are clean and dry and free of grease and dust.
If there is previously applied silicone on the surface, it should be cleaned mechanically and after that, it should be cleaned with a solvent like thinner.
Sides of joints and grouts should be covered with masking tape.
The application width should not be longer than 20 mm.
For applications, more than 10-12 mm, the depth of the sealant should be approximately half of its width.
Applied silicone may be corrected within 5-10 minutes.
If using masking tape, it should be removed right after the correction.
Silicone smeared around can be cleaned with thinner.

It contains minor amounts of volatile chemicals. It must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.

Not suitable for PE, PP, PFTE, neoprene, and bituminous surfaces.
It cannot be painted over.

Documents

TDS TDS
MSDS MSDS