Rapid Adhesive
PU Express
Rapid Adhesive
PU Express
PU Express is a rapid-curing, liquid, and transparent polyurethane adhesive that PU Express is a quick-curing, liquid, transparent polyurethane adhesive that reduces clamping time by half. shortens the clamping time to half.
750 g
12 months
PU Express is a rapid-curing, liquid, and transparent polyurethane adhesive that PU Express is a quick-curing, liquid, transparent polyurethane adhesive that reduces clamping time by half. shortens the clamping time to half.
750 g
12months
Specifications
Very short open-time and clamping time.
Strong adhesion on wood, concrete, bricks, metal, and glass.
Meets D4 specs according to DIN EN 204.
Low viscosity.
Odorless curing.
Gap filling capability.
Resistant to water, humidity, and warm environments.
Light yellow and transparent appearance.
Application areas
Suitable for wood construction materials and their repair work.
Manufacturing and fixing wood door frames and window sills.
Yacht and boat construction.
Technical info
Density: 1,10 g/ml
Viscosity (20°C): 3.000-4.000 cps
Open Time (20°C): 10-15 minutes
Clamping Time: 2 hours
Shelf Life: 9 months
Operating Temperature: -15°C to +100°C
Application Surface Temperature: 10°C to +30°C
Gross Weight: 750 g
Application methods
It should not be applied at temperatures below 5°C.
At very low temperatures, the adhesive should be left at room temperature for a while before application.
Surfaces that will be adhered to should be clean and free from grease and dust.
The adhesive should be applied only to one of the surfaces as a thin layer.
On extremely absorbent surfaces, it can be applied to both surfaces.
Adhesive will reach to the waterproof stage after 24 hours.
Safety info
It contains diphenylmethane -4, 4 diisocyanates. If inhaled for long periods, it may cause sensitivity to respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives do not carry risks to human health or to the environment.
Warnings!!
Since the product has very limited open time, pieces that will be bonded to each should be arranged quickly and pressed immediately.
Since the adhesive will grow, it should be only applied a necessary amount.
For maximum shelf life, the air inside the adhesive should be emptied out by turning it upside down.
The newly applied adhesive can be cleaned either by Promast Foam Cleanser or with a solvent such as acetone.
Very short open-time and clamping time.
Strong adhesion on wood, concrete, bricks, metal, and glass.
Meets D4 specs according to DIN EN 204.
Low viscosity.
Odorless curing.
Gap filling capability.
Resistant to water, humidity, and warm environments.
Light yellow and transparent appearance.
Suitable for wood construction materials and their repair work.
Manufacturing and fixing wood door frames and window sills.
Yacht and boat construction.
Density: 1,10 g/ml
Viscosity (20°C): 3.000-4.000 cps
Open Time (20°C): 10-15 minutes
Clamping Time: 2 hours
Shelf Life: 9 months
Operating Temperature: -15°C to +100°C
Application Surface Temperature: 10°C to +30°C
Gross Weight: 750 g
It should not be applied at temperatures below 5°C.
At very low temperatures, the adhesive should be left at room temperature for a while before application.
Surfaces that will be adhered to should be clean and free from grease and dust.
The adhesive should be applied only to one of the surfaces as a thin layer.
On extremely absorbent surfaces, it can be applied to both surfaces.
Adhesive will reach to the waterproof stage after 24 hours.
It contains diphenylmethane -4, 4 diisocyanates. If inhaled for long periods, it may cause sensitivity to respiratory organs. If the wet foam contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Completely dried out PU adhesives do not carry risks to human health or to the environment.
Since the product has very limited open time, pieces that will be bonded to each should be arranged quickly and pressed immediately.
Since the adhesive will grow, it should be only applied a necessary amount.
For maximum shelf life, the air inside the adhesive should be emptied out by turning it upside down.
The newly applied adhesive can be cleaned either by Promast Foam Cleanser or with a solvent such as acetone.