Fast curing-low pressing time.

Vertical and horizontal use. Non-sagging properties.

Resistant to moisture, water and sea water-D4.

Interior and exterior use. 

Transparent.

Provides good adhesive strength with various substates.

Aluminium brackets

Doors and windows

Density: 1,15 g/ml 

Water and Humidity Resistance: D4

Open Time: 10 minutes

Clamping Time: 30 minutes

Shelf Life: 12 months

Volume: 310 ml

It should not be applied in temperatures below 5°C.
Bonding substrates should be free of oil, dust, dirt, and loose particles.
The adhesive should be applied as a thin layer in one of the bonding substrates.
Non-porous and dry bonding substrates should be humidified with a wet cloth.

It contains isocyanate. If inhaled for long periods, it may cause sensitivity to respiratory organs. If the wet adhesive contacts the skin for long periods, it may cause local rash and sensitivity on the skin. For this reason, the environment should be well-ventilated during the application, contact with the skin should be avoided and protective gloves and safety goggles should be worn while working. Hardened Pu adhesive does not carry a health risk towards the environment and human health.

Since the open-time of the adhesive is very short clamping of the elements must be completed rapidly.
When hardened, the color of the adhesive turns white.
The adhesive must be spread on the substrates and applied as a thin layer.
In applications below +10°C curing time will be prolonged.
Full cure can take up to 12 hours.
Dry substrates must be humidified with a wet cloth.