It does not cause corrosion on metal surfaces.
Cures fast and neutral.
Resistant to UV light and weather conditions.
It does not crack, does not lose volume with time.
Adheres strongly on porous or nonporous building materials like concrete, stone, brick, ceramics, glass, metal, and wood.

Bonding and fixing mirrors.
Leak-proofing application on acid-sensitive alkali metal surfaces.
Sealing the joints around windowpanes.
Suitable on concrete, brick, steel, chrome, brass, zinc, copper, enamel, epoxy, polyester, PVC, ceramic, tile, and glass surfaces.

Curing Rate: 3mm/day

Density: 1,03 g/lt

Tack-Free Time: 15 minutes

Operating Temperature: -40°C and +180°C

Application Surface Temperature: Between +5°C and +40°C

Shelf Life: 15 months

Volume:  280 ml

Make sure application surfaces are clean and dry and free of grease and dust.
If there is previously applied silicone on the surface, it should be cleaned mechanically and after that, it should be cleaned with a solvent like thinner.
Sides of joints and grouts should be covered with masking tape.
The application width should not be longer than 20 mm.
For applications, more than 10-12 mm, the depth of the sealant should be approximately half of its width.
Applied silicone may be corrected within 5-10 minutes.
If using masking tape, it should be removed right after the correction.
Silicone smeared around can be cleaned with thinner.

It contains minor amounts of volatile chemicals. It must not be inhaled and the application ambiance must be ventilated if used indoors. Since it may cause irritation to avoid prolonged contact of wet silicone to skin. Hardened silicone does not contain any harmful components.

Not suitable for PE, PP, PFTE, neoprene, and bituminous surfaces.
It cannot be painted over.
It should not be used on joints and grouts which are continuously under heavy loads.
It is not antibacterial.