Neutral curing. It does not release any acid and can be applied to sensitive metals.
Pure silicone, does not contain any organic extender.
Almost odorless cure.
Resists shrinking and cracking caused by exposure to thermal cycling between -50°C ve +300°C.
Preserves its elasticity when permanently exposed to temperatures up to 250°C.
Improved oil resistance.

In gasket applications where resistance to high temperatures and/or high thermal cycling in car engines, machines, heating systems, industrial ovens, chimneys, etc.
A very good solution for gasket needs of rubber gaskets which is hard to find.
Meets extra high-quality gasket needs for specific applications.

Curing Rate: 3-4 mm/day

Density: 1,06 g/lt

Tack-Free Time: 10 minutes

Operating Temperature: -40°C and +250°C

Application Surface Temperature: Between +5°C and +40°C

Shelf Life: 12 months

Volume:  200 ml

Break and take off the plastic pin of the adaptor.
To adjust the flow speed, turn the adaptor to min-max directions.
Apply the silicone by pressing the adaptor.
For larger wall joints, you may cut the nozzle to get thicker silicone.
Do not forget to put the grey cap back on after finished using it.

The package contains gasses and it is pressurized. Avoid longtime contact with wet, not dried silicone.

Since excretes acids during curing, should not be used on sensitive metals, concrete or marble surfaces and should not be used on mounting mirrors.